44 Votes Vote
Seagate

Data Recovery from Seagate 7200.11 with LBA=0 problem ...

Posted by 346 days ago Seagate
In our program, the “Repair LBA=0″ is working to fix the verify error by reading the firmware modules from disk cache first, then check the verify codes and fix them, so if the module has some problems which make it impossible to read the firmware ... Power off the HDD, unscrews the PCB; connect the stand-alone PCB to the console as if it was an entire hard drive; power on the PCB and launch the CMD mode: Press [Ctrl + Z] on the keyboard to get a “F3 T>” prompt. ...
Discuss Bury
data recovery seagate lba problem All


Who Voted for this Story